Hardware develops for IoT, Bluetooth interfaces, Wi-Fi, Cellular 3G/4G, LoRa, GPS, Iridium.
Certificate-based on FCC standard.
In this era where new communications technologies are developed at all times and with the need to control and monitor equipment from both telemetry and M2M (machine-to-machine), we have integrated communications modules for local and global networks into any electronic device, thus obtaining information, control and have online any machine or electronic device.
Global Networks:
Cellular 2G, 3G, 4G LTE
LoRa
SigFox
GPS
Iridium, satellite
Local networks:
Bluetooth 2.0
BLE, Bluetooth Low Energy
WiFi
Xbee
RF 100-300MHz
We have wide experience developing IoT systems such as vehicle tracking, electronic gadgets, industrial telemetry, remote control, analysis of medical systems and remote communication, in general.
IoT Hardware Design
We take into account safety protocols, and technologies allowing 32-bit microcontrollers, at 72MHz. Functionality, practicality, aesthetics, and price will be considered from the initial design concept to the manufactured product development.
Safety and High Performance
As we are aware, every system is unique, we are focused on satisfying the specific requirements of communications, therefore depending on networks, use and normative, we develop a custom-made communication protocol:
TCP/IP
UDP
HTTP
RS232, RS485
CAN
OBDII
Bluetooth
Compliance Protocols
If you want to add means of communication or remote control to any device or electronic circuit, we have a wide range of options to turn your product into a smart device, ready to connect to the Internet or mobile applications.
Adaptation of any current electronic system
All our devices are designed with normative compliance, accordingly with the country where they will be used, such as radiofrequency, electromagnetic emission, low consumption, heat generation, etc:
UL and UL (Safety intrinsic)
FDA (Food and Drug Administration)
FCC
NOM (México)
EN 50155 (Railway Electronic System Design. (Spain and Mexico)
Normative Compliance
IoT Hardware Design
In this era where new communications technologies are developed at all times and with the need to control and monitor equipment from both telemetry and M2M (machine-to-machine), we have integrated communications modules for local and global networks into any electronic device, thus obtaining information, control and have online any machine or electronic device.
Global Networks:
Cellular 2G, 3G, 4G LTE
LoRa
SigFox
GPS
Iridium, satellite
Local networks:
Bluetooth 2.0
BLE, Bluetooth Low Energy
WiFi
Xbee
RF 100-300MHz
We have wide experience developing IoT systems such as vehicle tracking, electronic gadgets, industrial telemetry, remote control, analysis of medical systems and remote communication, in general.
Safety and High Performance
We take into account safety protocols, and technologies allowing 32-bit microcontrollers, at 72MHz. Functionality, practicality, aesthetics, and price will be considered from the initial design concept to the manufactured product development.
Compatible Protocols
As we are aware, every system is unique, we are focused on satisfying the specific requirements of communications, therefore depending on networks, use and normative, we develop a custom-made communication protocol:
TCP/IP
UDP
HTTP
RS232, RS485
CAN
OBDII
Bluetooth
Adaptation of any current electronic system
If you want to add means of communication or remote control to any device or electronic circuit, we have a wide range of options to turn your product into a smart device, ready to connect to the Internet or mobile applications.
Normative Compliance
All our devices are designed with normative compliance, accordingly with the country where they will be used, such as radiofrequency, electromagnetic emission, low consumption, heat generation, etc.
Our products and designs comply with the following Certifications:
UL and UL (Safety intrinsic)
FDA (Food and Drug Administration)
FCC
NOM (México)
EN 50155 (Railway Electronic System Design. (Spain and Mexico)
To request your quote for our Electronic Design Services, write to ventas@mextronics.com sending the following information:
1. A detailed description of the expected functionality.
2. Previous information on an initial design or starting product.
3. Development time requirements.
